Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

İngilizce
Almanca
Adım 8
Use the flat end of a spudger to disconnect the headphone jack from its socket on the logic board. Use the spudger to peel the headphone jack ribbon cable off the rear case. Use the spudger to peel the headphone jack ribbon cable off the rear case.
  • Use the flat end of a spudger to disconnect the headphone jack from its socket on the logic board.

  • Use the spudger to peel the headphone jack ribbon cable off the rear case.

Löse mit dem flachen Ende des Spudgers den Stecker der Kopfhörerbuchse aus seinem Anschluss auf dem Logic Board.

Löse mit dem Spudger das Flachbandkabel der Kopfhörerbuchse vom Rückgehäuse ab.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.