Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

İngilizce
Japonca
Adım 8
Use the flat end of a spudger to disconnect the headphone jack from its socket on the logic board. Use the spudger to peel the headphone jack ribbon cable off the rear case. Use the spudger to peel the headphone jack ribbon cable off the rear case.
  • Use the flat end of a spudger to disconnect the headphone jack from its socket on the logic board.

  • Use the spudger to peel the headphone jack ribbon cable off the rear case.

スパッジャーの平面側先端を使って、ロジックボード上のソケットからヘッドホンジャックの接続を外します。

スパッジャーを使って、リアケースからヘッドホンジャックリボンケーブルを剥がします。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.