Ana içeriğe geç

Sostituzione sella Suzuki SV650 1999-2002

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 4 kılavuzları etkileyecektir.

İngilizce
İtalyanca

Adım 1 çevriliyor

Adım 1
1999-2002 Suzuki SV650 Seat Replacement: adım 0, 2 resimden 1. 1999-2002 Suzuki SV650 Seat Replacement: adım 0, 2 resimden 2.
  • If you have frame covers below your seat, remove them by removing the 4 mm allen bolts holding them on. Use a 4 mm allen wrench to turn the screws counter-clockwise until they come off.

  • Once the frame covers are off, remove the 4 mm allen seat bolts on both sides of the seat. Use the 4 mm allen wrench to turn the screws counter-clockwise until they come off.

  • The bolt in the picture is not stock.

  • Lift the front of the seat, then pull it off the frame.

Se hai delle carene sotto la sella, rimuovile svitando le viti a testa cava esagonale da 4 mm che le reggono. Utilizza una chiave a brugola da 4 mm per ruotare le viti in senso antiorario fino a quando non si staccano.

Una volta tolti i pannelli, rimuovere le viti a brugola da 4 mm su entrambi i lati della sella. Utilizza la chiave a brugola da 4 mm per ruotare le viti in senso antiorario fino a quando non si staccano.

Il bullone nella foto non è quello di serie.

Solleva la parte anteriore del sedile, quindi staccalo dal telaio.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.