-
Dip a clean gloved finger into a bottle of new oil and spread the oil onto the gasket of the new oil filter.
-
Wipe off any excess oil from your hands/fingers when you are done as the oil may make handling the filter or tools difficult.
-
Guide the oil filter back over the engine's oil filter threads and turn the filter clockwise until it is snug.
-
If the filter is difficult to turn at the beginning of its threads, stop! You may be cross threading the oil filter. Re-align the oil filter and try again.
-
Do not over-tighten your oil filter. Doing so may cause the oil filter seal to leak and will make removing the oil filter very difficult in the future.
-
Remove the oil drain pan from under the car.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.
Kılavuz Adımlarını Düzenlemek için Klavye Kısayolları:
Ctrl + N
Bir sonraki satır
Ctrl + P
Bir önceki satır
Ctrl + Shift + N
Aşağıya yeni bir satır ekle
Ctrl + Shift + P
Yukarıya yeni bir satır ekle
Ctrl + ]
Mevcut satırı girintili yap
Ctrl + [
Mevcut satır girintisini kaldır
Ctrl + D
Mevcut satırı sil
Shift + ;
Sonraki adıma git.
Shift + H
Önceki adıma git.
Bütün kısayolları göster