Eşyalarını Tamir Et Topluluk Mağaza

iPhone 7 배터리 교체

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

Kılavuza Dön
İngilizce
Korece
Önceki adım

Adım 6 çevriliyor

Adım 6
iPhone 7 Battery Replacement: adım 0, 1 resimden 1.

  • Remove the battery from the rear case.

  • If your replacement battery came in a plastic sleeve, remove the sleeve before installation by pulling it away from the ribbon cable.

  • If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.

  • Before you adhere the replacement battery, temporarily reconnect the battery connector to the logic board socket. This ensures that the battery is properly aligned in its recess.

  • Adhere the battery, disconnect it, and continue reassembling your device.

  • If your new battery doesn’t have adhesive preinstalled, refer to this guide to replace the adhesive strips.

  • Perform a force restart after reassembly. This can prevent several issues and simplify troubleshooting.

후면 케이스에서 배터리를 분리하세요.

교체 배터리가 플라스틱 슬리브에 들어있는 경우 설치하기 전에 리본 케이블 반대편으로 배터리를 슬리브에서 꺼내세요.

새 배터리에 접착제가 사전 설치되어 있지 않은 경우, 이 안내서를 참조하여 접착제 스트립을 교체하세요.

재조립한 다음 휴대폰을 다시 시작하세요. 다시 시작하면 여러가지 문제를 방지하며 문제 해결을 간소화합니다.

[* black] Remove the battery from the rear case.
-[* icon_note] If your replacement battery came in a plastic sleeve, remove the sleeve before installation by pulling it away from the the ribbon cable.
+[* icon_note] If your replacement battery came in a plastic sleeve, remove the sleeve before installation by pulling it away from the ribbon cable.
+[* icon_reminder] If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.
+[* icon_reminder] Before you adhere the replacement battery, temporarily reconnect the battery connector to the logic board socket. This ensures that the battery is properly aligned in its recess.
+ [* black] Adhere the battery, disconnect it, and continue reassembling your device.
[* icon_reminder] If your new battery doesn’t have adhesive preinstalled, refer to [guide|56465|this guide] to replace the adhesive strips.
-[* black] Perform a [https://support.apple.com/en-us/HT201559|force restart] after reassembly. This can prevent several issues and simplify troubleshooting.
+[* black] Perform a [https://support.apple.com/guide/iphone/force-restart-iphone-iph8903c3ee6/ios|force restart|new_window=true] after reassembly. This can prevent several issues and simplify troubleshooting.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.