Ana içeriğe geç

Remplazo del carro de los cartuchos de tinta de la HP Photosmart C3180

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 5 kılavuzları etkileyecektir.

İngilizce
İspanyolca
Adım 4
HP Photosmart c3180 Ink Cartridge Track Replacement: adım 0, 2 resimden 1. HP Photosmart c3180 Ink Cartridge Track Replacement: adım 0, 2 resimden 2.
  • Remove the power button circuit board from the support frame by pinching the left side, and pulling forward and to the left simultaneously.

  • Push up on the tab holding the secondary control circuit board with the spudger and pull it forward to remove it.

  • Be careful not to pull too hard on the cable connecting the power button control circuit board and the secondary control circuit board to the main circuit board

Remueve la placa de circuito del botón de encendido de su soporte agarrándolo del lado izquierdo, y tirando hacia adelante y a la izquierda simultáneamente.

Presiona la pestaña que contiene la segunda placa de circuitos con el spudger y tira hacia adelante para removerla.

Ten cuidado de no tirar demasiado fuerte del cable que conecta la placa de circuito de control del botón de encendido y la placa de circuito de control secundaria a la placa de circuito principal.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.