Replacing the Sony Cyber-shot DSC-P10 Built-in Flash

Adım 10 çevriliyor

İngilizce

Flemenkçe

Adım 10

Gently lift the rear circuit board away from the camera.
The film behind it is attached, but not securely. Keep the circuit board and the film together to avoid damage.
Rotate the circuit board 180 degrees so that it is directly below the camera.
Now gently remove the front circuit board and rotate both the rear and front circuit boards 180 degrees so that they are directly above the camera (picture 2).

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.