Apple AirPort Express Base Station Power Supply Kit

Adım 13 çevriliyor

İngilizce

Fransızca

Adım 13

Insert the leads of the 390 Ω resistor through the holes indicated in step 7. This resistor will have an orange, grey, brown and gold band on it. The direction of the resistor does not matter.
Be sure to route the leads so that they do not cover any of the indicated holes in steps 7 and 8.
Solder the resistor to the PCB and clip off the excess leads.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.