Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

İngilizce
Çince

Adım 1 çevriliyor

Adım 1
"The cat is out of the bag!" - :( loose ribbon cable (Image 1 red) Lift the top hinged lid (not just the scanner lid) Remove any power to the printer and use a long flat bladed screw driver to release  the cartridges - move them into the centre position (Image 2)
Preparation
  • "The cat is out of the bag!" - :( loose ribbon cable (Image 1 red)

  • Lift the top hinged lid (not just the scanner lid)

  • Remove any power to the printer and use a long flat bladed screw driver to release the cartridges - move them into the centre position (Image 2)

  • Follow the general advice on this video (https://www.youtube.com/watch?v=n3bQ0n41...) to release the printhead park lock but be aware your printhead on the C315 will be on the right hand side not the left

  • Remove the cartridges by pinching the ends with thumb and finger, then lifting upwards and out

  • Now remove the printhead cartridge carrier tray by pushing up on the grey tab above the pressure point (label) (Image 3)

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.