Eşyalarını Tamir Et Topluluk Mağaza

GoPro Hero5 Black のハウジングの交換

Kılavuza Dön
İngilizce
Japonca
Adım 2
GoPro Hero5 Black Battery Housing Replacement: adım 0, 1 resimden 1.

  • Use the tweezers to grasp the housing firmly and pull it away from the three ribbon cables.

  • Pull the battery housing until the half circle grooves on the back housing match up with the grooves on the battery housing.

  • After the screws have been removed from the inside, the battery housing is only held down by adhesive.

ピンセットを使ってハウジングをしっかりと掴み、3本のリボンケーブルから引いて外します。

バウジング裏側のサークル状のネジ溝半分までバッテリーハウジングを引っ張り、バッテリーハウジング状のネジ溝と合わせます。

ネジが内部から取り外せたら、バッテリーハウジングは接着剤のみで固定されています。

-[* black] Use the tweezers to grasp the housing firmly and pull it away from the three ribbon cables.
+[* black] Use the [product|IF145-020|tweezers] to grasp the housing firmly and pull it away from the three ribbon cables.
[* black] Pull the battery housing until the half circle grooves on the back housing match up with the grooves on the battery housing.
[* icon_note] After the screws have been removed from the inside, the battery housing is only held down by adhesive.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.