Ana içeriğe geç
İngilizce
Almanca

Adım 13 çevriliyor

Adım 13
Locate the IR sensor located behind the black Apple logo. If necessary, peel back the tape covering the IR sensor.
  • Locate the IR sensor located behind the black Apple logo.

  • If necessary, peel back the tape covering the IR sensor.

  • Detach the IR sensor by pulling it straight up and out from the case.

  • Do not attempt to completely remove the IR sensor from the iMac as it is still attached to the logic board.

Du findest den IR Sensor hinter dem schwarzen Apple Logo.

Ziehe, wenn notwendig, das Klebeband ab, das den IR Sensor bedeckt.

Entferne den IR Sensor, indem du ihn gerade nach oben aus dem Gehäuse ziehst.

Entferne den IR Sensor nicht ganz aus dem iMac, da er noch mit dem Logic Board verbunden ist.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.