Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

İngilizce
Çince

Adım 10 çevriliyor

Adım 10
This is a well-connected motherboard; to get it free, we pop off the digitizer, backlight, and speaker connectors, two antennas, and the two Joy-Con rails. And then remove six Phillips screws. But hey, that's some awesome modularity. Even the eMMC storage pops off with an independent PCB! Nintendo made a 6.2" tablet with removable flash storage, so don't say it can't be done.
  • This is a well-connected motherboard; to get it free, we pop off the digitizer, backlight, and speaker connectors, two antennas, and the two Joy-Con rails. And then remove six Phillips screws.

  • But hey, that's some awesome modularity. Even the eMMC storage pops off with an independent PCB!

  • Nintendo made a 6.2" tablet with removable flash storage, so don't say it can't be done.

  • The storage board contains a single Toshiba THGBMHG8C2LBAIL 32 GB eMMC NAND Flash IC.

  • Sadly, the modularity ends at the USB-C port. This high-wear component will require some intense soldering skills to replace.

这是一个精密的主板;为了拿出来,我们翘掉了触摸屏,背光灯和扬声器排线,2个天线,和2个Joy-Con滑轨。之后还拆了6个螺丝。

但是!竟然eMMC闪存是从一块独立的电路板拆下来了!这真是极好的!

任天堂做出了可拆卸闪存的6.2寸平板,所以不要说这不能。

这个储存电路板的闪存是东芝(Toshiba )THGBMHG8C2LBAIL 32 GB eMMC NAND闪存。

遗憾的是,这种模块化设计没用在USB-C接口上。这个高度集中的地方将会要求一些特殊的手段来替换组件。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.