Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

İngilizce
Fransızca
Adım 4
When the glue is softened, insert a spudger through the camera bay in the midframe and push the display away from the frame. Place a plastic card or two opening picks under the display bezel at the top, between the screen and the frame. This will prevent the glue from readhering. Place a plastic card or two opening picks under the display bezel at the top, between the screen and the frame. This will prevent the glue from readhering.
  • When the glue is softened, insert a spudger through the camera bay in the midframe and push the display away from the frame.

  • Place a plastic card or two opening picks under the display bezel at the top, between the screen and the frame. This will prevent the glue from readhering.

Dès que la colle s'est ramollie, insérez une spatule (spudger) à travers la baie de la caméra dans le châssis et appuyez sur l'écran pour l'éloignez du châssis.

Placez une carte en plastique ou deux médiators en haut de l'écran, sous le joint, entre l'écran et le châssis. Cela évitera que l'adhésif recolle.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.