Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 8 kılavuzları etkileyecektir.

İngilizce
Japonca
Adım 3
Use the tip of a spudger to lift the left fan connector straight up from its socket on the logic board. Be sure to only pry up on the connector itself not on the socket or you may damage the machine. It is useful to twist the spudger axially from beneath the fan cable wires to release the connector.
  • Use the tip of a spudger to lift the left fan connector straight up from its socket on the logic board.

  • Be sure to only pry up on the connector itself not on the socket or you may damage the machine.

  • It is useful to twist the spudger axially from beneath the fan cable wires to release the connector.

  • Remove the left fan from the case.

スパッジャーの先端を使って、基板上のソケットから左側ファンのコネクタをまっすぐ引き抜きます。

コネクタ自体を引き抜いてください。ソケットには接触しないでください。デバイスにダメージを与えてしまうことがあります。

コネクタを解放するには、ファンケーブルワイヤの下からスパッジャーを差し込み、捻りながら外すと便利です。

ケースから左側ファンを取り出します。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.