Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 2 kılavuzları etkileyecektir.

İngilizce
Japonca
Adım 3
Try to keep the strips flat and unwrinkled during this procedure; wrinkled strips will stick together and break instead of pulling out cleanly. Slowly pull one battery adhesive tab away from the battery, toward the bottom of the iPhone. Pull steadily, maintaining constant tension on the strip until it slips out from between the battery and the rear case. For best results, pull the strip at a 60º angle or less.
  • Try to keep the strips flat and unwrinkled during this procedure; wrinkled strips will stick together and break instead of pulling out cleanly.

  • Slowly pull one battery adhesive tab away from the battery, toward the bottom of the iPhone.

  • Pull steadily, maintaining constant tension on the strip until it slips out from between the battery and the rear case. For best results, pull the strip at a 60º angle or less.

  • The strip will stretch to many times its original length. Continue pulling and re-grab the strip near the battery if necessary.

この手順では接着ストリップを水平に保ったまま、シワが寄らない状態で作業を進めてください。シワが入ったストリップは、引き抜く作業中、裂けてしまいます。

ゆっくりとバッテリーの接着タブをiPhoneの底側に向けて1本引き抜きます。

バッテリーとリアケースの間からストリップが抜け出るまで一定の強さで引っ張ります。一番効率良い方法は、60度の角度で引っ張ります。

このストリップは何倍にも伸びます。必要に応じてバッテリー付近までストリップを持ち替えて作業を続けてください。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.