GoPro HD Hero2 LCD Replacement

İngilizce

İtalyanca

Adım 1 çevriliyor

Adım 1

Turn the motherboard assembly over to the side with the LCD and the camera lens.
Gently wedge a plastic opening tool underneath the foam padding on top of the LCD ribbon cable.
Pry the foam padding up until the LCD ribbon cable can be lifted off the surface of the motherboard.
Do not try to remove the LCD yet, as its ribbon cable is still connected to the motherboard via a ZIF connector.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.