iMac Intel 17" 前面板更换

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 17 kılavuzları etkileyecektir.

Adım 3 çevriliyor

İngilizce

Çince

Adım 3

Re-orient your iMac so it sits upright on the stand.
Insert a plastic card up into the corner of the air vent slot near the top of the rear case.
Push the card toward the top of the iMac to release the front bezel latch.
Pull the front bezel away from the rear case.
Repeat this process for the other side of the front bezel.
It may be necessary to apply several layers of duct tape to the top of the access card to aid in releasing the latches.
If the bezel refuses to release, try pressing the lower edge back onto the rear case and repeat this opening process.

将iMac立起来
将塑料卡向上插入靠近后壳顶部的通风槽的一角。
将卡推向 iMac 的顶部以松开前面板闩锁。
将前面板拉离后壳。
对前面板板的另一侧重复此过程。
可能需要在卡的顶部贴几层胶带，以帮助松开闩锁。
如果挡板无法松开，请尝试将下边缘按回后壳并重复此打开过程。

	[* icon_note] Re-orient your iMac so it sits upright on the stand.
-	[* black] Insert a plastic card up into the corner of the air vent slot near the top of the rear case.
+	[* black] Insert a [product\|IF145-101\|plastic card] up into the corner of the air vent slot near the top of the rear case.
	[* black] Push the card toward the top of the iMac to release the front bezel latch.
	[* black] Pull the front bezel away from the rear case.
	[* black] Repeat this process for the other side of the front bezel.
	[* icon_note] It may be necessary to apply several layers of duct tape to the top of the access card to aid in releasing the latches.
	[* black] If the bezel refuses to release, try pressing the lower edge back onto the rear case and repeat this opening process.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.