Ana içeriğe geç
İngilizce
İspanyolca
Adım 3
Once the screen is warm to the touch, apply a suction cup as close to the heated edge of the phone as you can. If your display is badly cracked, the suction cup may not stick. Try lifting the display with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed. Lift on the suction cup, and insert an opening pick under the display assembly.
  • Once the screen is warm to the touch, apply a suction cup as close to the heated edge of the phone as you can.

  • If your display is badly cracked, the suction cup may not stick. Try lifting the display with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed.

  • Lift on the suction cup, and insert an opening pick under the display assembly.

Una vez que la pantalla esté caliente al tacto, aplica una ventosa tan cerca al borde caliente del teléfono como puedas.

Si tu pantalla está muy rota, coloca una capa de cinta en la pantalla e intenta levantar la pantalla con una cinta resistente. o pega con pegamento instantáneo la ventosa y espera que se seque para proceder.

Levanta desde la ventosa e introduce la púa de apertura debajo del ensamblaje de pantalla.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.