Ana içeriğe geç
İngilizce
Japonca
Adım 3
Once the screen is warm to the touch, apply a suction cup as close to the heated edge of the phone as you can. If your display is badly cracked, the suction cup may not stick. Try lifting the display with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed. Lift on the suction cup, and insert an opening pick under the display assembly.
  • Once the screen is warm to the touch, apply a suction cup as close to the heated edge of the phone as you can.

  • If your display is badly cracked, the suction cup may not stick. Try lifting the display with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed.

  • Lift on the suction cup, and insert an opening pick under the display assembly.

スクリーンを触って十分に温まったら、吸盤カップをデバイス本体の温めた側の端付近に取り付けてください。

ディスプレイ全体にひび割れが広がっている場合は吸盤カップが装着できないことがあります。ディスプレイを強力テープで持ち上げたり、吸盤カップにスーパーボンドを付けると上手くいきます。

吸盤カップを持ち上げて、ディスプレイアセンブリの下にできた隙間に開口ピックを差し込みます。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.