Ana içeriğe geç
İngilizce
Japonca
Adım 6
Repeat the previous heating and cutting procedure for the remaining three sides of the phone. Leave an opening pick on each side as you continue to prevent the adhesive from resealing. Don't cut too deep on the top or bottom, or you may damage the front-facing sensors or speaker assembly on the top, or capacitive buttons on the bottom.
  • Repeat the previous heating and cutting procedure for the remaining three sides of the phone.

  • Leave an opening pick on each side as you continue to prevent the adhesive from resealing.

  • Don't cut too deep on the top or bottom, or you may damage the front-facing sensors or speaker assembly on the top, or capacitive buttons on the bottom.

残り3辺についても、iOpenerで温めて開口ピックで切断する前の手順を繰り返します。

開口ピックを各サイドに残したまま、接着剤の再装着を防ぎます。

デバイスの上部もしくは下部では深くまでピックを挿入しないでください。フロント向きセンサーや上部のスピーカーアセンブリ、下部の容量ボタンにダメージを与えてしまいます。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.