Ana içeriğe geç
İngilizce
Çince
Adım 6
Repeat the previous heating and cutting procedure for the remaining three sides of the phone. Leave an opening pick on each side as you continue to prevent the adhesive from resealing. Don't cut too deep on the top or bottom, or you may damage the front-facing sensors or speaker assembly on the top, or capacitive buttons on the bottom.
  • Repeat the previous heating and cutting procedure for the remaining three sides of the phone.

  • Leave an opening pick on each side as you continue to prevent the adhesive from resealing.

  • Don't cut too deep on the top or bottom, or you may damage the front-facing sensors or speaker assembly on the top, or capacitive buttons on the bottom.

对手机的其余三面重复之前的加热和切割程序。

在继续防止粘合剂重新密封时,在每一侧留下一个开撬片。

请勿在顶部或底部插入的太深,否则可能会损坏顶部的前置传感器或扬声器组件或底部的电容按钮。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.