Eşyalarını Tamir Et Topluluk Mağaza

Samsung Galaxy S7 Vervanging van de batterij

Kılavuza Dön
İngilizce
Flemenkçe
Adım 2
Samsung Galaxy S7 Battery Replacement, Pry up the battery: adım 0, 2 resimden 1. Samsung Galaxy S7 Battery Replacement, Pry up the battery: adım 0, 2 resimden 2.
Pry up the battery

  • Use an opening pick to pry up the battery from the bottom using firm, constant pressure.

  • Do not use excessive force or pry at the battery with metal tools.

  • You will be prying against the case directly above the daughterboard and antenna cables. Pry carefully to avoid damaging either of these components.

  • You may need to reheat and reapply the iOpener repeatedly to further soften the adhesive. The adhesive is tough and it may take a few tries to get the pick started under the battery.

  • Try your best not to deform the battery during this process. Soft-shell lithium-ion batteries can leak dangerous chemicals, catch fire, or even explode if damaged.

Çeviri buraya girin

Gebruik een openingsplectrum om de batterij van de onderkant omhoog te duwen.

Gebruik geen excessieve kracht en duw of wrik de batterij niet omhoog met metalen tools.

Als je de batterij omhoog duwt, zit je plectrum tegen de behuizing direct boven het dochterbord en de antennekabels. Wees dus erg voorzichtig bij het omhoogduwen en zorg dat je deze onderdelen niet beschadigt.

Het kan nodig zijn om de iOpener meerdere malen te verwarmen en toe te dienen om de lijm voldoende te verzachten. De lijm is stug en zal niet zomaar loskomen.

Doe je best om de batterij niet te vervormen tijdens deze stappen. Soft-shell lithium-ion batterijen kunnen gevaarlijke chemicaliën lekken, in brand vliegen of zelfs exploderen als deze worden beschadigd.

-[* black] Use an opening pick to pry up the battery from the bottom.
+[title] Pry up the battery
+[* black] Use an opening pick to pry up the battery from the bottom using firm, constant pressure.
[* icon_caution] Do not use excessive force or pry at the battery with metal tools.
[* icon_caution] You will be prying against the case directly above the daughterboard and antenna cables. Pry carefully to avoid damaging either of these components.
[* icon_note] You may need to reheat and reapply the iOpener repeatedly to further soften the adhesive. The adhesive is tough and it may take a few tries to get the pick started under the battery.
[* icon_caution] Try your best not to deform the battery during this process. Soft-shell lithium-ion batteries can leak dangerous chemicals, catch fire, or even explode if damaged.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.