Ana içeriğe geç

Samsung Galaxy S8 主板更换

Kılavuz Bilgisi

= Bitti = Eksik
İngilizce
Çince
    Use this guide to remove or replace a faulty motherboard.
    This guide involves removing the rear glass cover, you will need replacement adhesive to reattach the back cover to the phone.
    The motherboard and daughterboard will differ slightly depending on whether you have the North American Snapdragon (G950U) or international Exynos (G950F) version of the phone. This guide uses the North American version. The motherboard and daughterboard are not interchangeable between the two versions.
    '''Before disassembling your phone, discharge the battery below 25%. The battery can catch fire and/or explode if accidentally punctured, but the chances of that happening are much lower if discharged.'''
      After reapplying adhesive, follow these instructions in reverse order to reassemble your device.
      After you've completed the repair, ++[link|https://www.ifixit.com/Guide/How+to+Test+Your+Samsung+Device+After+a+Repair/152254|follow this guide|new_window=true]++ to test your repair.

      Kılavuz Adımları

      Adım 1

      使用平头撬棒断开传感器组的连接。

      Adım 2

      使用平头撬棒断开前置摄像头的连接。

      Adım 3

      使用平头撬棒断开显示屏和触控的连接。

      Adım 4

      使用尖头的撬棒断开两个连接主板和副板的天线。

      Adım 5

      使用平头的撬棒断开连接主板和副板的带状天线电缆。

      Adım 6

      使用平头撬棒抬起主板并使其与副板断开连接。

      Adım 7

      将主板移出手机。

      Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.