Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

İngilizce
Japonca

Adım 10 çevriliyor

Adım 10
Using the long #2 Phillips Screwdriver (7 inches or more) remove the 4 inside top screws and set aside. Next VERY CAREFULLY turn the grinder over to be right-side-up again. You want to avoid stress on the wires.
Remove inside top screws
  • Using the long #2 Phillips Screwdriver (7 inches or more) remove the 4 inside top screws and set aside.

  • Next VERY CAREFULLY turn the grinder over to be right-side-up again. You want to avoid stress on the wires.

  • Perhaps place the unit on a towel so there is minimal stress on the wires while we work on the top. As we continue remain aware of the wires so they do not get stressed.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.