Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

İngilizce
Almanca
Adım 6
Remove four more screws. The bottom left screw will release the audio board support. Peel back the lenses at a 45° angle from the bottom up. You'll then see two yellow strips held with black protective tape. Peel back the tape with tweezers.
Separate the lenses from the PCB
  • Remove four more screws. The bottom left screw will release the audio board support.

  • Peel back the lenses at a 45° angle from the bottom up.

  • You'll then see two yellow strips held with black protective tape. Peel back the tape with tweezers.

  • Also with tweezers, remove the yellow tape over the connection between the PCB and the lenses.

  • The lenses appear to be fresnel on the inside but smooth on the outside.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.