Ana içeriğe geç

Fix Your Stuff

Right to Repair

Parts & Tools

İngilizce
Çince
Adım 7
With the lenses removed, you can begin separating the PCB from whats left of the HMD. USE TWEEZERS to peel back the two pieces of metallic tape on the PCB (this tape is SHARP — do not use your hands). Remove the four screws to remove the two metal clips on each side of the PCB.
Remove metallic tape
  • With the lenses removed, you can begin separating the PCB from whats left of the HMD.

  • USE TWEEZERS to peel back the two pieces of metallic tape on the PCB (this tape is SHARP — do not use your hands).

  • Remove the four screws to remove the two metal clips on each side of the PCB.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.