Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

İngilizce
Çince
Adım 9
The metal cover to the PCB can be easily pried apart with a flat head screwdriver. After doing this, the two screws connecting the cable to the PCB is revealed. Remove the two screws, then pop off the connector straight up, not at an angle.
Separate metal and cable from PCB
  • The metal cover to the PCB can be easily pried apart with a flat head screwdriver.

  • After doing this, the two screws connecting the cable to the PCB is revealed.

  • Remove the two screws, then pop off the connector straight up, not at an angle.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.