Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 19 kılavuzları etkileyecektir.

İngilizce
Japonca

Adım 11 çevriliyor

Adım 11
Lifting from the side nearest the battery, rotate the logic board toward the top of the MacBook Pro. Using the flat end of a spudger, carefully push the MagSafe 2 connector out of its socket on the bottom of the logic board. When reinstalling the logic board, check the cables at the marked locations to make sure they don't get pinned underneath the logic board.
  • Lifting from the side nearest the battery, rotate the logic board toward the top of the MacBook Pro.

  • Using the flat end of a spudger, carefully push the MagSafe 2 connector out of its socket on the bottom of the logic board.

  • When reinstalling the logic board, check the cables at the marked locations to make sure they don't get pinned underneath the logic board.

  • Clockwise from top: keyboard, trackpad, battery, right speaker, keyboard backlight, display, microphone, headphone jack, left speaker.

バッテリーに一番近い側から本体デバイスの上部に向けてロジックボードを持ち上げます。

スパッジャーの平面側先端を使って、MagSafe 2コネクタをロジックボード下側上のソケットからゆっくりと押して外します。

ロジックボードを再装着する際は、赤の印でマークされたケーブルの位置を確認してください。ロジックボードときちんと接続されているか確認します。

上から時計回りに:キーボード、トラックパッド、右側スピーカー、キーボードバックライト、ディスプレイ、マイク、ヘッドフォンジャック、左側スピーカー

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.