Craig CD681 Speakers Replacement

İngilizce

Japonca

Adım 11 çevriliyor

Adım 11

Continue removing the circuit board's screws.
On both sides place two fingers between the circuit board and the face of the radio.
Gently pull the circuit board straight back being careful not to break the volume and tuning knob posts on the opposite side of the board.
The two white cables are soldered to the circuit board and the power transformer at the back of the radio. Once removed, the circuit board has to be set aside inside the radio.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.