ENDAT-3220M mainboard

Onboard VIA C3 Processor with 128KB Level 1 and 64KB
Level 2 Cache with FSB 100/133MHz EBGA Package:

• CPU w/ FAN: C3 series
• CPU w/o FAN: Eden series

VIA 8601 66/100/133MHz North Bridge with integrated 2D/3D
Graphic Controller and VT82C686B Super I/O

AMI Flash BIOS

One DIMM socket accepts up to 512MB SDRAM

Two 40-pin box header support up to 4 EIDE devices, Ultra
DMA transfer 33/66/100 mode and BIOS auto-detect

Support up to two Floppy Disk Drives

• Chipset: On VT8601 chip 2D/3D Graphic Controller with
  SMA up to 8MB
• Display Type: CRT only

• Chipset: VIA VT82C686B integrated Super I/O
• Serial Ports: 3 high speed RS-232 ports and 1 high speed
  RS-232/422/485 port (via COM2 as option), all 4 serial ports
  support 16C550 UART and 16 byte FIFO, and with +5V,
  +12V power selector
• COM3, 4 and LPT2 via 2nd I/O kit: UC-COM34
• Parallel Ports: 2 Bi-directional parallel ports support
  SPP/EPP/ECP mode
• USB Ports: 2 ports with 1.1 compliant
• Infrared Port: 1 IrDA TX/RX port with pin header
• Keyboard / Mouse Connectors: Support PS/2 keyboard
  and mouse with onboard connector and pin header
  reserved onboard

• Chipset: Realtek 8139D or optional for Intel 82551QM/ER(no Boot ROM function)
• 10/100 BaseT support, full duplex with RJ 45 connectoronboard
• Compliant with IEEE 802.3X
• Boot from LAN function

Supports power saving modes including APM 1.2 compliant

On chip RTC with external Li Battery backup

One PCI expansion with edge connector for up to 3 PCI slots
expansion via riser card with PCI 2.2 compliance

Mini-ATX / ITX form factor, 170 x 170 mm (6.69” x 6.69”)

Support ATX power supply
Operating Temperature: 0 ~ 60°C

• ENDAT-3220M-1R-8
  with Realtek LAN + C3 800MHz CPU
• ENDAT-3220M-1R-10
  with Realtek LAN + C3 1GHz CPU
• ENDAT-3220M-1R-5
  with Realtek LAN + Eden 533MHz CPU
• ENDAT-3220M-1i-8
  with Intel LAN + C3 800MHz CPU
• ENDAT-3220M-1i-10
  with Intel LAN + C3 1GHz CPU
• ENDAT-3220M-1i-5
  with Intel LAN + Eden 533MHz CPU