Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Galaxy Tab 3 10.1 Screen

  • Galaxy Tab 3 10.1 Screen / White / B-Stock
  • Galaxy Tab 3 10.1 Screen / White / B-Stock
  • Galaxy Tab 3 10.1 Screen / Brown / B-Stock
  • Galaxy Tab 3 10.1 Screen / Brown / B-Stock
  • Galaxy Tab 3 10.1 Screen / Black / B-Stock
  • Galaxy Tab 3 10.1 Screen / Black / B-Stock
Galaxy Tab 3 10.1 Screen

$24,99

$24,99

Ürün tekrar stoklarımızda mevcut olduğunda size bir mesaj göndereceğiz.

Nintendo Switch Kit'leri

Oyuna geri dönmek için hızlı bir düzeltme

Switch Kit'leri Satın Al

Nintendo Switch Kit'leri

Oyuna geri dönmek için hızlı bir düzeltme

Switch Kit'leri Satın Al

Ürün Detayı

Açıklama

Açıklama

This Galaxy Tab 3 10.1 replacement screen includes all of the small parts preinstalled in the assembly, saving time and increasing the quality of your repair.

Replace a cracked or scratched front glass panel or malfunctioning TFT LCD display on your tablet. This screen and digitizer assembly will renew the appearance of your front panel, restore touch function, and eliminate the dead pixels or flickering on an aging display.

Parça Montajında olanlar:

Parça Montajında olanlar:

  • Front Glass Digitizer Screen
  • 10.1 inch (1280x800) TFT LCD
  • Front Plastic Frame

Uyumluluk

Onarım hikayeleri

Kullanıcı avatarı
Alexandre DUVERT's Story Photo #873125

Sorunum

Broken touchscreen, broken LCD display

Tamirim

Very easy. Just open the tablet, remove everything from previous assembly: battery, ribbon cables, motherboard, cameras, buttons, sensors, antennae, audio connector, sensors etc. Put everything on the new assembly. Close. Enjoy.

Note: makes sense to first test . . .

Kullanıcı avatarı

Sorunum

Screen flicker and couldn't turn it on or off

Tamirim

It went really well. Everything worked and it looked like new even though it was refurbished

Önerim

Just take your time and follow the guide. Take pic if necessary to remember where parts go.

Kullanıcı avatarı

Sorunum

The LCD was experiencing fuzziness and lines were jumping across the screen.

Tamirim

The part we got was A1. The repair took about a good 15 to 20 minutes. Transferring small parts was fairly easy since it was so few parts.

Önerim

Be careful with the camera ! its very fragile