iPhone SE A1662 Parts
Grab a toolkit for your iPhone SE A1662 model and fix your broken phone!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
Kategori Seçin
- Tümü
- Accessories
- Adapters
- Adhesive Pads
- Adhesive Strips
- Antennas
- Batteries
- Buttons
- Cables
- Cameras
- Case Components
- Clips
- Dock Connectors
- Earbuds
- Tutma
- Headphone Jacks
- iFixit Özel Ürünleri
- Lenses
- Lightning Connector
- Microphones
- Mikro Lehimleme
- Prying and Opening
- Screens
- Screws
- Sensors
- SIM
- Speakers
- Test Cables
- Alet Takımları
- Vibrators
iPhone SE A1662 ile çalışan parçalar:
iPhone SE (1st Gen) Battery
Replace a 1624 mAh battery compatible with a 1st generation iPhone SE. 3.82 Volts (V), 6.21 Watt Hours (Wh). This replacement does not require soldering.
iPhone SE (1st Gen) Screen
Replace a screen compatible with a 1st generation iPhone SE. Includes all of the small parts pre-installed in the assembly, saving time and increasing the quality of your...
iHold EVO
Flexible LCD holder
iPhone 5s/5c/SE (1st Gen) Battery Adhesive Strips
Replace the adhesive film that secures the battery to the rear case compatible with the iPhone 5s, iPhone 5c, and 1st generation iPhone SE model smartphone. Part #923-057...
iPhone SE (1st Gen) Lightning Connector and Headphone Jack
This lightning connector assembly includes the lightning connector, primary microphone, and headphone jack and is compatible with 1st generation iPhone SE models.
iPhone SE (1st Gen) Home Button Assembly
Replace a home button assembly compatible with a 1st genaration iPhone SE. Part #821-2092-A.
Lightning to USB Charging Cable
Charge or sync lightning port equipped portable Apple devices
PlierTek Corner and Sidewall Repair Pliers
PlierTek Pliers are the easiest fastest way to fix bent iPhone and iPad corners and sidewalls.
NuGlas Tempered Glass Screen Protector for iPhone 5/5s/5c/SE (1st Gen)
Protect the display on your iPhone 5, 5s, 5c, or 1st generation SE from impacts and scratches with this precise laser-cut screen protector.
iPhone 5/5c/5s/SE (1st Gen) Screw Set
Use this complete set of 64 screws compatible with an iPhone 5, iPhone 5c, iPhone 5s, or 1st generation iPhone SE to replace missing or stripped screws.
Cihaz Bilgisi
The iPhone SE, released March 31, 2016, is Apple's successor to the iPhone 5S as a low-cost alternative to their flagship iPhone 6s/6s Plus lineup. Like the iPhone 5S, the SE features a 4-inch, 1130-by-640 Retina display and TouchID sensor in the exact same form factor. Internally, the SE has the same A9 processor and 12-megapixel iSight camera as the 6s/6s Plus, but does not lacks a 3D touch display.
Model A1662 is intended for the US carriers AT&T, T-Mobile, and Verizon.