iPod Classic 160 GB Hard Drives
Replacement parts for your iPod Classic 160 GB model to fix your broken iPod!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
Kategori Seçin
iPod Classic 160 GB modelinizi seçin:
iPod Classic 160 GB ile çalışan parçalar:
iPod Video or Classic (Thin Case) Hard Drive Cable
Connects hard drive to logic board
iPod Classic 120 GB Hard Drive
Replace a broken or damaged hard drive for your 120 GB iPod Classic with this part. This is a used, OEM part.
iPod Classic 160 GB (Thin) Hard Drive
Replace a broken or damaged hard drive for your Thin 160 GB iPod Classic with this part.
iPod Classic 80 GB Hard Drive
Replace a broken or damaged hard drive for your 80 GB iPod Classic with this part.
iPod Classic 160 GB (Thick) Hard Drive
Replace a broken or damaged hard drive for your Thick 160 GB iPod Classic with this part.
Cihaz Bilgisi
The "thick" version of 160 GB iPod Classic is the original larger-capacity Classic. Apple has since simplified the Classic line to offer only the "thin" version. In September 2009, a new thin 160 GB was introduced. If you are unsure which version you have (as some parts are not interchangeable between models), perform the following steps:
1) Locate the serial etched on the rear panel of the iPod
2) Go to Apple's Online Service Assistant and enter your serial number and country
3) Look at the text under the picture on the left. If it reads "iPod Classic," you have the thick version. If it reads "iPod Classic (Late 2009)," you have the thin version.
The iPod Classic is quite enigmatic to diagnose when problems occur. Use our iPod Classic troubleshooting guide to figure out what's wrong.
Select a category below or browse all compatible parts to find what you need to fix your iPod!