Ana içeriğe geç
« Tüm hikâyelere geri dön

LCD backlight was dead.

louislongchamps -

Hikâye görseli
  • Görsel #1
  • Görsel #2


After one minute or so, the backlight was turning off, probably because of overheating.


I ordered a LCD for my MacBook A1181 and I replaced it without removing the panel. It was a little bit tricky to plug it in the inverter, but watching at pics (Fig.1) of the inverter helped a lot to know where I was going to plug it.


Buy one extra bezel mounting clip in case. I was not able to put the bezel back in place so I removed every gray mounting clip from it and clipped them on the LCD mount (Fig.2) before to clip the bezel in place. This was the only way I could do it without destroying all clips.

Spudger Resmi


Phillips #00 Screwdriver Resmi
Phillips #00 Screwdriver


MacBook 13.3" LCD Panel Resmi
MacBook 13.3" LCD Panel


« Tüm hikâyelere geri dön

0 Yorum

Yorum Ekle