Ana içeriğe geç

Giriş

The bike light in this guide is sold under various brand names, but in fact is a no-name brand and comes with no distinct markings on the packaging. Some uses for this guide are dead batteries or a broken clip.

Bu teardown bir tamir kılavuzu değildir. 5 LED 6 Mode Rear Bike Light cihazınızı onarmak için, servis kılavuzumuzu kullanın.

  1. Obtain the necessary tools
    • Obtain the necessary tools

  2. Insert coin or any flat object into edge of light cover Pry open until cover loosens
    • Insert coin or any flat object into edge of light cover

    • Pry open until cover loosens

  3. Remove the single Phillips #00 screw holding the circuit board in place Remove both AAA batteries
    • Remove the single Phillips #00 screw holding the circuit board in place

    • Remove both AAA batteries

  4. Remove both Phillips #00 screws holding the clip in place Remove the clip with a flat object
    • Remove both Phillips #00 screws holding the clip in place

    • Remove the clip with a flat object

    • The button will fall out when removing the clip. Do not lose it!

  5. Congratulations! You completed your device teardown!
    • Congratulations! You completed your device teardown!

Alex Sireci

Üyelik tarihi: 30-09-2013

100 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 14-8, Forte Fall 2013 Cal Poly, Team 14-8, Forte Fall 2013 üyesi

CPSU-FORTE-F13S14G8

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 8

Son 30 gün: 17

Her zaman: 1,388