CCI Smart Strip 04941 Teardown

The Assembled Product, unplugged from wall

Turn Smart Strip upside down and locate four screw holes in corners

Unscrew four corner screws with #0 Phillips Screwdriver

Locate four latch slots in case

Use 2.4mm Slotted Screwdriver, put tip into center of slot, with tip on outer edge of slot, and press inward

Take two halves of case apart with your hands

Lift Ground Copper Strip upward off of power plugs by hand

Locate latch securing power plugs to bottom of case

Using slotted 2.4mm screwdriver, pry latch away from power plugs to loosen power plugs

Lift power plugs out of bottom of case along with circuit assembly