Ana içeriğe geç

Bu söküm üzerinde çalışılıyor – Son değişiklikleri görmek için düzenli olarak yenile!

Neye ihtiyacın var

  1. Dell Quietkey SK-8000 Keyboard Teardown, Remove Back Plastic Body: adım 1, 2 resimden 1. Dell Quietkey SK-8000 Keyboard Teardown, Remove Back Plastic Body: adım 1, 2 resimden 2.
    • Flip the keyboard over to expose 8 screws.

    • Use a Phillips screwdriver to unscrew and remove each screw.

  2. Dell Quietkey SK-8000 Keyboard Teardown: adım 2, 2 resimden 1. Dell Quietkey SK-8000 Keyboard Teardown: adım 2, 2 resimden 2.
    • Lift the keyboard upward from the bottom.

    • Do not pull too hard when lifting the base. Be careful not to destroy the wires connecting to the base of the keyboard.

    • Use a Phillips screwdriver to remove the remaining ten screws on the aluminum plate.

  3. Dell Quietkey SK-8000 Keyboard Teardown, Completion: adım 3, 3 resimden 1. Dell Quietkey SK-8000 Keyboard Teardown, Completion: adım 3, 3 resimden 2. Dell Quietkey SK-8000 Keyboard Teardown, Completion: adım 3, 3 resimden 3.
    • Carefully lift each part out. Each part should lift out very easily after the screws are removed.

  4. Dell Quietkey SK-8000 Keyboard Teardown, Siltek Chip Reveal: adım 4, 1 resimden 1.
    • The keyboard controller is seen to be a Siltek R4462.

Ion

Üyelik tarihi: 09/29/15

479 İtibar

3 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 10-5, Green Fall 2015 Cal Poly, Team 10-5, Green Fall 2015 üyesi

CPSU-GREEN-F15S10G5

3 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 6

Her zaman: 969