Eşyalarını Tamir Et Topluluk Mağaza

FlySky FS-TH9X Teardown Battery Harness

Giriş

Several factors can cause the harness to crack or break. If this is the case, you must replace the harness entirely. Doing so will consist of ordering a replacement battery harness.

  1. FlySky FS-TH9X Teardown Battery Harness, Battery Harness: adım 1, 1 resimden 1.

    • Locate the battery pack on the back of the device all the way at the bottom.

    • Link for the replacement part, Battery Holder

    Düzenle

  2. FlySky FS-TH9X Teardown Battery Harness: adım 2, 1 resimden 1.

    • Once you located the battery pack, carefully push on the pack and down at the same time to open the back plate.

    Düzenle

  4. FlySky FS-TH9X Teardown Battery Harness: adım 3, 1 resimden 1.

    • After the back plate is open, the harness battery is accessible.

    Düzenle

  5. FlySky FS-TH9X Teardown Battery Harness: adım 4, 2 resimden 1. FlySky FS-TH9X Teardown Battery Harness: adım 4, 2 resimden 2.

    • Locate the plug for the battery harness in order to pull it out carefully from where it is plugged.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Jonathan Sanchez

Üyelik tarihi: 02/09/23

109 İtibar

1 Kılavuz yazıldı

Rozetler: 3

Ekip

University of North Texas, Team 3-3, Saru Jimmy Spring 2023 University of North Texas, Team 3-3, Saru Jimmy Spring 2023 üyesi

UNT-SARU JIMMY-S23S3G3

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 13

Her zaman: 112