Ana içeriğe geç

Giriş

This will provide information on dissembling the phone to allow for repairs.

Bu teardown bir tamir kılavuzu değildir. Kyocera Oystr cihazınızı onarmak için, servis kılavuzumuzu kullanın.

  1. Kyocera Oystr Teardown, Removing the battery: adım 1, 3 resimden 1. Kyocera Oystr Teardown, Removing the battery: adım 1, 3 resimden 2. Kyocera Oystr Teardown, Removing the battery: adım 1, 3 resimden 3.
    • Make sure the phone is turned off before disassembly.

    • Lift the bottom of the phone's back cover upwards, revealing the phone's battery housing.

    • Remove the battery from the casing. This is simply a precaution.

    • Turn the phone over so that the front side is facing you. Flip open the device in preparation for the next step.

  2. Kyocera Oystr Teardown, Removing screws from screen: adım 2, 3 resimden 1. Kyocera Oystr Teardown, Removing screws from screen: adım 2, 3 resimden 2. Kyocera Oystr Teardown, Removing screws from screen: adım 2, 3 resimden 3.
    • Peel the Virgin Mobile sticker from the phone's screen, revealing two screws beneath it.

    • Using the Tri-Wing Y0 screwdriver, remove the two screws from the screen.

  3. Kyocera Oystr Teardown, Exposing internal components: adım 3, 3 resimden 1. Kyocera Oystr Teardown, Exposing internal components: adım 3, 3 resimden 2. Kyocera Oystr Teardown, Exposing internal components: adım 3, 3 resimden 3.
    • Lift the plastic cover of the phone screen upwards by prying around the perimeter of the screen with a plastic opening tool.

    • After lifting the plastic cover from the screen, remove the two screws from the metal cover holding the screen in place.

  4. Kyocera Oystr Teardown, Removing metal cover: adım 4, 1 resimden 1.
    • Remove metal cover by lifting up and away from the device.

  5. Kyocera Oystr Teardown, Screen removal: adım 5, 3 resimden 1. Kyocera Oystr Teardown, Screen removal: adım 5, 3 resimden 2. Kyocera Oystr Teardown, Screen removal: adım 5, 3 resimden 3.
    • Remove the phone's speakers by using the plastic opening tool to pry up and away from the device. These speakers will dangle by the wires attached to the board.

    • Use your fingernail to detach the ribbon connecting the board to the screen.

    • Remove the damaged screen from the device.

  6. Kyocera Oystr Teardown, Completing the repair: adım 6, 1 resimden 1.
    • Follow steps in reverse order to replace Kyocera Oystr’s screen.

David

Üyelik tarihi: 04-10-2011

24 İtibar

2 adet Kılavuz yazıldı

Team

UW Stout, Team 5-7, Zhou Fall 2011 UW Stout, Team 5-7, Zhou Fall 2011 üyesi

UWSTOUT-ZHOU-F11S5G7

2 Üyeler

4 adet Kılavuz yazıldı

2 Comments

where do I get a new screen?

LARS ANDERSEN - Yanıt

where do i get a new screen

thanks

LARS ANDERSEN - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 25

Her zaman: 4,184