Bu teardown bir tamir kılavuzu değildir. Nikko La Nera Junior cihazınızı onarmak için, servis kılavuzumuzu kullanın.

  1. The Car, the Remote Control and a Phillips screwdriver.
    • The Car, the Remote Control and a Phillips screwdriver.

    Yorum Ekle

  2. Let's start!
    • Let's start!

    • Remove this screw.

    Yorum Ekle

    • The rear wing

    • Unscrew this black screws

    • Remove the wing

    Yorum Ekle

    • The Exhausts

    • Remove these screws

    • Remove the exhausts

    Yorum Ekle

    • The Rear Cover

    • Remove these screws

    Yorum Ekle

    • The "tubolar" body

    • Flip the car

    • Remove these screws.

    • Remove the body

    Yorum Ekle

    • The seat

    • Remove these screws (one of these is back of the seat)

    • Remove the seat.

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • The antenna

    • Remove this screw

    • Raise the circuit board

    • Remove the antenna

    Yorum Ekle

    • The "engine"

    • Remove these screws

    • Remove the gears cover

    • Remove the engine block

    Yorum Ekle

    • Remove the gear and his hinge

    • Remove this piece of plastic

    • The Engine!

    Yorum Ekle

    • Remove the wheels from the car

    Yorum Ekle

    • The Steering Mechanism

    • Remove these screws

    • Remove the cover

    • Lift the wheels

    Yorum Ekle

    • Remove the steering bar...

    • ...the two screws...

    • ...and the cover.

    Yorum Ekle

    • Remove the first "gear"...

    • ...and the second.

    Yorum Ekle

    • Remove the steering motor

    • Remove the plastic cover

    • Be careful!

      • Remove this piece

    Yorum Ekle

    • Remove the second piece...

    • ...and the spring.

    • Congratulations! The car is torn down!

    Yorum Ekle

    • Let's tear down the remote!

    • Remove these screws

    Yorum Ekle

    • Remove the screw in the PCB

    • Remove the screw in the piece of plastic at the end of the antenna

    • Remove the plastic piece around the beginning of the antenna

    Yorum Ekle

    • Carefully de-route the antenna from the PCB

    Yorum Ekle

    • Detach the two parts of eat key.

    • Congratulations! You've ended the teardown!

    Yorum Ekle

Federico Barutto

Üyelik tarihi: 12-06-2011

286 İtibar

2 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 8

Her zaman: 1,385