Ana içeriğe geç
  1. Unplug the device before following this guide. First, place the device on its side, making sure the switch is not facing down.
    • Unplug the device before following this guide.

    • First, place the device on its side, making sure the switch is not facing down.

    • Remove the eight 12mm Phillips #02 screws from the base.

  2. Gently separate the panel from the device.
    • Gently separate the panel from the device.

    • Be sure not to tug at the wires that are still connected.

  3. Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın

    Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın
  4. Locate the tie strap holding the wires and cut with a pair of scissors. Use care not to snip the wires.
    • Locate the tie strap holding the wires and cut with a pair of scissors.

    • Use care not to snip the wires.

  5. Make note of the wiring arrangement of each bundle before this step. Using wire cutters, cut each wire as close to the wire connector as possible. Cut the wires in both bundles.
    • Make note of the wiring arrangement of each bundle before this step.

    • Using wire cutters, cut each wire as close to the wire connector as possible.

    • Cut the wires in both bundles.

    • To reassemble the cotton candy maker after cutting the wires, follow our rewiring guide.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Joshua Harriger

Üyelik tarihi: 13-01-2015

285 İtibar

2 adet Kılavuz yazıldı

Takım

USF Tampa, Team 3-5, Hickman Winter 2015 USF Tampa, Team 3-5, Hickman Winter 2015 üyesi

USFT-HICKMAN-W15S3G5

5 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 75