Roborock Auto-empty Dock (Onyx): Teardown

Yazan: DegenFixer (ve bir diğer katılımcı)

Yayımlama: September 24, 2024

Yazan: DegenFixer (ve bir diğer katılımcı)

Yayımlama: September 24, 2024

Sökme

Giriş

This is a teardown guide for the auto-empty dock, model Onyx3, for Roborock's robotic vacuums.

This guide does not show how to get to the suction fan, and mostly focuses on the motherboard/PSU.

I may update it further in the future.

Bu teardown bir tamir kılavuzu değildir. Roborock Auto-empty Dock cihazınızı onarmak için, servis kılavuzumuzu kullanın.

Remove the marked screws.
All are PH1.
Bend the contacts back (img3) to prevent them from shorting the PSU once you pull the assembly out.

Take out the PCBA+PSU assembly.
When taking out the assembly, make sure to disconnect the other connectors. I forgot to take pictures of these, so just take it out carefully.
Remove the connecting cable between the PSU and the main PBCA.
Unscrew the PSU.
Remove the PSU.