Giriş

Here is a relatively inexpensive and small guitar amp. This particular one needed some repair. So while I was waiting for parts, I figured I might as well make a teardown.

Bu teardown bir tamir kılavuzu değildir. Rogue G10 cihazınızı onarmak için, servis kılavuzumuzu kullanın.

Here is the front view of the Rogue G10 amp. Back side shows 4 Phillips head screws that need to be removed. Here are the 4 #6x1" screws
  • Here is the front view of the Rogue G10 amp.

  • Back side shows 4 Phillips head screws that need to be removed.

  • Here are the 4 #6x1" screws

Yorum Ekle

Use a small screwdriver or other small suitable prying instrument to remove the back cover. With the back cover removed the speaker and amp become visible. Remove the 2 Phillips head screws from the carrying handle. These two screws also attach the amp to the onside of the case.
  • Use a small screwdriver or other small suitable prying instrument to remove the back cover.

  • With the back cover removed the speaker and amp become visible.

  • Remove the 2 Phillips head screws from the carrying handle. These two screws also attach the amp to the onside of the case.

Yorum Ekle

Here are the two screws from the handle. They are 1/8"x1 1/4" Remove the 16 screws from the plastic corners. These corners serve no purpose other than decoration. There are 4 rubber feet on the bottom of the amp.
  • Here are the two screws from the handle. They are 1/8"x1 1/4"

  • Remove the 16 screws from the plastic corners. These corners serve no purpose other than decoration.

  • There are 4 rubber feet on the bottom of the amp.

Yorum Ekle

This shows the corners with the screws removed. Remove the rubber feet by removing the Phillips head screws. On the left and right side of the amp is a Phillips head screw, located  1/3 down from the top and to the front. These two screws hold the front panel to which the speaker is attached. Remove those.
  • This shows the corners with the screws removed.

  • Remove the rubber feet by removing the Phillips head screws.

  • On the left and right side of the amp is a Phillips head screw, located 1/3 down from the top and to the front. These two screws hold the front panel to which the speaker is attached. Remove those.

Yorum Ekle

Here is the one on the right side, same location. Remove it as well With those two screws removed, the front panel which houses the speaker, can be simply removed
  • Here is the one on the right side, same location.

  • Remove it as well

  • With those two screws removed, the front panel which houses the speaker, can be simply removed

Yorum Ekle

remove the front panel and place aside. With the front panel removed, the amp will now simply lift out as well Here is the amp totally disassembled. Straight forward job. No glue, no hidden screws.
  • remove the front panel and place aside.

  • With the front panel removed, the amp will now simply lift out as well

  • Here is the amp totally disassembled. Straight forward job. No glue, no hidden screws.

Yorum Ekle

oldturkey03

Üyelik tarihi: 29-09-2010

502.142 İtibar

117 adet Kılavuz yazıldı

Takım

OTS OTS üyesi

Business

1 Üye

117 adet Kılavuz yazıldı

Bir Yorum

great thank you

Jazmin Backer - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 3

Son 30 Gün: 16

Tüm Zamanlar: 1,730