Giriş

This is a Teardown of my old broken Samsung Galaxy Pocket (GT-S5300)

Bu teardown bir tamir kılavuzu değildir. Samsung Galaxy Pocket (GT-S5300) cihazınızı onarmak için, servis kılavuzumuzu kullanın.

  1. Remove the battery cover
    • Remove the battery cover

    • Then remove the battery

    Yorum Ekle

  2. Remove all 4 screws
    • Remove all 4 screws

    what is the screwsize for this, please?

    Jett Jusay - Yanıt

    • Slide a guitar pick between the sliver bezel and the rear of the phone

    • Slide it all the way around until the rear is loosened from the logic board and screen

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove LCD connector

    Yorum Ekle

    • Remove logic board from screen by lifting the logic board up and removing the digitizer connector

    Yorum Ekle

    • Remove the 5 screws to remove the shield

    Yorum Ekle

    • Remove what seems to be the antenna from the logic board

    Yorum Ekle

    • Slide guitar pick between the digitizer and lcd

    • Make sure not to get under the black adhesive on the back be the digitizer

    • At the top of the digitizer there is a circuit be careful up there

    Yorum Ekle

    • So that's my teardown for the Samsung galaxy pocket (GT-S5300)

    Yorum Ekle

Ryan

Üyelik tarihi: 08-02-2014

360 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 10

Son 30 Gün: 35

Her zaman: 10,751