Giriş

The Teardown is pretty much the same as other Samsung Slider phones

Bu teardown bir tamir kılavuzu değildir. Samsung Intensity cihazınızı onarmak için, servis kılavuzumuzu kullanın.

Remove the back cover and battery
  • Remove the back cover and battery

Yorum Ekle

Remove the 8 screw that hold the back cover down.
  • Remove the 8 screw that hold the back cover down.

  • Carefully pry back piece off

  • Start at the bottom and work toward the top.

Yorum Ekle

Use the ipod opening tool to disconnect the Connector
  • Use the ipod opening tool to disconnect the Connector

Yorum Ekle

Carefully remove the main board Make sure to not tear the microphone cable, pry it from the phone carefully
  • Carefully remove the main board

    • Make sure to not tear the microphone cable, pry it from the phone carefully

Yorum Ekle

Remove the 6 screws Pry to ribbon cable assembly loose from the slider
  • Remove the 6 screws

  • Pry to ribbon cable assembly loose from the slider

  • Its glued on the left and right side

Yorum Ekle

Remove the 4 screw the holds the slider to the phone assembly
  • Remove the 4 screw the holds the slider to the phone assembly

  • one of the screws will be behind the hinge

  • Carefully pry slider assembly loose from display assembly

Yorum Ekle

Remove the tape and pop the connectors and pull all the ribbon cables loose Carefully pry the speaker loose from the case. Carefully pry the speaker loose from the case.
  • Remove the tape and pop the connectors and pull all the ribbon cables loose

  • Carefully pry the speaker loose from the case.

Yorum Ekle

Carefully work the keyboard loose from the display assembly
  • Carefully work the keyboard loose from the display assembly

  • There are a couple fragile clips that hold it in place

Yorum Ekle

LCD comes out pretty easily Pry it from the bottom and work up the sides to release it if stuck
  • LCD comes out pretty easily

  • Pry it from the bottom and work up the sides to release it if stuck

  • The glass can be removed with a little heat from a heat gun or blow dryer

  • Pry it out from the outside edges working around carefully

Yorum Ekle

David

Üyelik tarihi: 10-08-2011

110 İtibar

1 Kılavuz yazıldı

Takım

West Georgia Technology West Georgia Technology üyesi

Business

1 Üye

1 Kılavuz yazıldı

Bir Yorum

This was so helpful! How can I show my gratitude to you for these helpful instructions?

teh_pwnerer22 - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 3

Son 30 Gün: 22

Her zaman: 3,651