Bu Teardown'da Kullanılan Aletler

Giriş

We disassembled this calculator on April 17, 2010.

Bu teardown bir tamir kılavuzu değildir. Sanyo CX 110 cihazınızı onarmak için, servis kılavuzumuzu kullanın.

    • Here is the Sanyo CX 110 calculator.

    • Remove these two screws from the back of the calculator using a Phillips #0 Screwdriver.

  1. Now that we removed the back of the calculator, here is the battery and the back of the logic board. Sanyo Tight-Seal Power-Up Sum-3 1.5V AA battery.
    • Now that we removed the back of the calculator, here is the battery and the back of the logic board.

    • Sanyo Tight-Seal Power-Up Sum-3 1.5V AA battery.

    • Positive contact for the battery.

    • Negative contact for the battery.

  2. Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  3. Remove these 7 screws using a razor blade.
    • Remove these 7 screws using a razor blade.

    • Be careful not to break the razor blade because it is fragile.

    • Turn the circuit board 180 degrees after removing screws.

  4. You will now see the circuit board and the buttons. Remove the buttons for the calculator. You will now see the circuit board and the buttons. Remove the buttons for the calculator.
    • You will now see the circuit board and the buttons. Remove the buttons for the calculator.

  5. Now we're all done! Just take the LCD apart and you are done completely!
    • Now we're all done! Just take the LCD apart and you are done completely!

    • Sum-3 Sanyo Battery.

    • LCD Screen Parts (darkener, inverter, LCD screen.

    • Circuit Board for the calculator.

    • Buttons for the calculator (square root, memory, percent, operators, numbers, etc.)

    • Housing for the calculator.

samhnri

Üyelik tarihi: 07-04-2010

417 İtibar

2 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 6

Son 30 Gün: 8

Her zaman: 4,877