Ana içeriğe geç

Bu Teardown'da Kullanılan Aletler

Giriş

This is a Sega Genesis model 2. In this tear down you will be able to see what the inside of the Sega Genesis should look like.

Bu teardown bir tamir kılavuzu değildir. Sega Genesis II cihazınızı onarmak için, servis kılavuzumuzu kullanın.

  1. Flip the system over
    • Flip the system over

  2. Remove the four outer screws (you may want a small cup to keep your screws in.) Remove the four outer screws (you may want a small cup to keep your screws in.)
    • Remove the four outer screws (you may want a small cup to keep your screws in.)

  3. Take plastic top off.
    • Take plastic top off.

  4. Remove the nine inner screws.
    • Remove the nine inner screws.

  5. Remove metal piece.
    • Remove metal piece.

  6. You now have access to your circuit board. (If you wish to remove the circuit board, continue.)
    • You now have access to your circuit board. (If you wish to remove the circuit board, continue.)

  7. Remove the two screws highlighted in picture to remove the circuit board.
    • Remove the two screws highlighted in picture to remove the circuit board.

  8. Lift the black piece of plactic up.
    • Lift the black piece of plactic up.

  9. Lift up the metal piece.
    • Lift up the metal piece.

  10. You now have access to the inside of the bottom plastic piece.
    • You now have access to the inside of the bottom plastic piece.

  11. This is the circuit board. This is the circuit board. This is the circuit board.
    • This is the circuit board.

  12. Do the steps backwards to reassemble.
    • Do the steps backwards to reassemble.

Thor Odinson

Üyelik tarihi: 04-06-2015

152 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 8

Son 7 gün: 33

Son 30 gün: 130

Her zaman: 7,583