Ana içeriğe geç

Giriş

I have a PlayStation 1, and i have decided to make a new teardown of it.

I'm spanish, so my english is a bit poor, and sorry for the mistakes made in this teardown.

Without further delay, we start.

Bu teardown bir tamir kılavuzu değildir. PlayStation cihazınızı onarmak için, servis kılavuzumuzu kullanın.

  1. Here's the PS1. Turn the PS1 over and remove the six screws.
    • Here's the PS1.

    • Turn the PS1 over and remove the six screws.

  2. Remove the top cover. It's very easy.
    • Remove the top cover. It's very easy.

  3. Disconnect both CD-ROM connectors.
    • Disconnect both CD-ROM connectors.

    • CD connector one and the socket it connects to.

    • CD connector two and the socket it connects to.

  4. Remove the CD-ROM reader. You should be able to pull it out gently, although you may have to wiggle it around a bit to loosen the rubber holders. Remove the CD-ROM reader. You should be able to pull it out gently, although you may have to wiggle it around a bit to loosen the rubber holders.
    • Remove the CD-ROM reader. You should be able to pull it out gently, although you may have to wiggle it around a bit to loosen the rubber holders.

  5. Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın

    Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın
  6. Detach both cables. They go to the power supply and to the memory cards and controller connectors.
    • Detach both cables. They go to the power supply and to the memory cards and controller connectors.

  7. Remove the four screws and the metal cover.
    • Remove the four screws and the metal cover.

  8. Now you have the motherboard!
    • Now you have the motherboard!

    • And the power supply.

    • Remove the four screws from the motherboard and the power supply.

  9. Once the screws are removed, remove the power supply.
    • Once the screws are removed, remove the power supply.

  10. Remove the motherboard, and both of the screws from the memory card/ controller connection mechanism.
    • Remove the motherboard, and both of the screws from the memory card/ controller connection mechanism.

  11. Now, you have all your PlayStation 1 parts!
    • Now, you have all your PlayStation 1 parts!

    • Main Board

    • Lower Casing

    • EMI Shield

    • Power Supply

    • Disk Reader

    • Memory Card/ Controller Mechanism

imacg517

Üyelik tarihi: 06-05-2010

164 İtibar

1 Kılavuz yazıldı

Bir Yorum

That’s a PAL PS1. May be different from NTSC models.

Daniel Powers - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 Gün: 32

Son 30 Gün: 157

Her zaman: 20,035