Ana içeriğe geç

Bu Teardown'da Kullanılan Aletler

Giriş

This guide will walk you through the steps to completely disassemble a Sprint Airave.

Bu teardown bir tamir kılavuzu değildir. Sprint Airave SCS-26UC2 cihazınızı onarmak için, servis kılavuzumuzu kullanın.

  1. Remove the external antenna, GPS cover, and GPS module. Remove the external antenna, GPS cover, and GPS module. Remove the external antenna, GPS cover, and GPS module.
    • Remove the external antenna, GPS cover, and GPS module.

  2. Use a pry tool to remove the white outer cover. Pry towards the front of the device. Continue prying down the length of the cover until it pops off. Use a pry tool to remove the white outer cover. Pry towards the front of the device. Continue prying down the length of the cover until it pops off. Use a pry tool to remove the white outer cover. Pry towards the front of the device. Continue prying down the length of the cover until it pops off.
    • Use a pry tool to remove the white outer cover. Pry towards the front of the device. Continue prying down the length of the cover until it pops off.

  3. Locate and remove the four Phillips screws
    • Locate and remove the four Phillips screws

  4. iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now

    iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now
  5. With the cover removed you now have access to the circuit board.
    • With the cover removed you now have access to the circuit board.

  6. Using an 8mm socket you can remove the antenna pigtail.
    • Using an 8mm socket you can remove the antenna pigtail.

  7. Release the clip indicate to remove the circuit board.
    • Release the clip indicate to remove the circuit board.

  8. Here is the circuit board fully removed. Here is the circuit board fully removed.
    • Here is the circuit board fully removed.

Erik Leonard

Üyelik tarihi: 11-06-2011

164 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 5

Her zaman: 3,107