Bu Teardown'da Kullanılan Aletler

Giriş

The Timex TX5020 is an electronic thermometer that can be used both indoors and outdoors. It requires only a screwdriver to take apart.

Bu teardown bir tamir kılavuzu değildir. Timex TX5020 LCD Electronic Thermometer cihazınızı onarmak için, servis kılavuzumuzu kullanın.

Here is the fully assembled thermometer. Here is the fully assembled thermometer.
  • Here is the fully assembled thermometer.

Yorum Ekle

Slide the battery compartment cover off by applying downward and forward pressure.
  • Slide the battery compartment cover off by applying downward and forward pressure.

Yorum Ekle

Loosen and remove the four screws from the back of the thermometer. Loosen and remove the four screws from the back of the thermometer.
  • Loosen and remove the four screws from the back of the thermometer.

Yorum Ekle

Lift the back panel away from the rest of the case.
  • Lift the back panel away from the rest of the case.

Yorum Ekle

Remove the three screws holding the circuit board in place. Remove the three screws holding the circuit board in place.
  • Remove the three screws holding the circuit board in place.

Yorum Ekle

Lift the circuit board away from the case. Be careful not to pull too hard as the board is attached to the battery contacts.
  • Lift the circuit board away from the case.

  • Be careful not to pull too hard as the board is attached to the battery contacts.

Yorum Ekle

Remove the screen from it's compartment. Remove the push buttons from their compartment.
  • Remove the screen from it's compartment.

  • Remove the push buttons from their compartment.

Yorum Ekle

Here's a full view of the disassembled components (circuit board, screen, push buttons, and case).
  • Here's a full view of the disassembled components (circuit board, screen, push buttons, and case).

Yorum Ekle

Chris L

Üyelik tarihi: 17-12-2014

850 İtibar

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 4

Son 30 Gün: 14

Her zaman: 1,037